DURAFORM RECOMMENDS USING ONLY AUTHENTIC DURAFORM

ACCESSORIES AND REPLACEMENT PARTS WITH OUR FORMS!

HEX BOLT  and SLEEVE NUT

Used in combination to attach hardware or as field replacement hardware to high density overlaid plywood forms

SPREADER CLIPS

Replaces the need for ties and loose clips when laying forms on their sides for 2' and 6' high walls

HARD LATCH

Used to secure DURAFORM panels together or to secure panels to corners in the desired configuration DURAFORM Boron Panel Latch is one of the hardest latches manufactured, insuring strength and durability

CORNER CLIP

Made of hardened steel, these clips are used to attach 4 and 5 filler panels to adjacent full size panels or fillers

HALF CLIP

Constructed of hardened steel, half clips have a single tie slot to secure tie position when the attached latch hardware cannot be used

STACKING PLATE

Allows for placement of ties at the top of forms Nail stacked panels to prevent lift Allows additional ties in the wall for supplemental strength

BREAKOFF TOOL

Break off tie ends, releasing pressure on latch to start stripping the forms Lifetime Warranty Available in Economy style

TURNBUCKLE

Adjusts alignment accurately and quickly Rolled threads assure ease of operation event when the forms are full 6 inch Take Up Constructed of heavy steel 10 foot Turnbuckle Wall Brace available - same DURAFORM Turnbuckle assembly with steel piping attached to provide an all inclusive product

SCAFFOLD BRACKET

A DURAFORM exclusive. A true scaffold bracket that fits properly on any DURAFORM or compatible 4-Bar, 5-Bar or 6-Bar system. Allows construction of proper hand rail and toe board with 20 inch walk space for your workers safety. Tube brace back to the form for rigidity. Tested and satisfy OSHA and ANS standards covering scaffolding safety and rated HEAVY DUTY by their definitions. Testing exceeded requirements for maximum loading of 1,190lbs. We recommend spacing brackets on six foot centers. Make Safety a Habit

OFFSET CLIP

Connects forms on stepdown Holds tie in place, nails flush to next form

2 inch OFFSET FILLER

Matches with 8 inch filler to transition a straight wall by 2 inches Transition from 12 to 10 or 10 to 8 or any dimension thats needed

STACKING TIE and WEDGE

Thicker tie for stacking with 4 Bar system Available for 8,10 or 12 walls (100 pcs per box) Reusable wedges (50 pcs per box)

DURAFORM 2018

ALWAYS USE PROPER POURING AND SAFETY PRACTICES!

Giving Form to Concrete Ideas!

DURAFORM RECOMMENDS USING ONLY

AUTHENTIC DURAFORM ACCESSORIES AND

REPLACEMENT PARTS WITH OUR FORMS!

HEX BOLT and SLEEVE NUT

Used in combination to attach hardware or as field replacement hardware to high density overlaid plywood forms

SPREADER CLIPS

Replaces the need for ties and loose clips when laying forms on their sides for 2 foot and 6 foot high walls

HARD LATCH

ALWAYS USE PROPER POURING AND SAFETY PRACTICES!

Giving Form to Concrete Ideas!

© DURAFORM 2018 

Used to secure DURAFORM panels together or to secure panels to corners in the desired configuration DURAFORM Boron Panel Latch is one of the hardest latches manufactured, insuring strength and durability

CORNER CLIP

Made of hardened steel, these clips are used to attach 4 and 5 filler panels to adjacent full size panels or fillers

HALF CLIP

Constructed of hardened steel, half clips have a single tie slot to secure tie position when the attached latch hardware cannot be used

STACKING PLATE

Allows for placement of ties at the top of forms Nail stacked panels to prevent lift Allows additional ties in the wall for supplemental strength

BREAKOFF TOOL

Break off tie ends, releasing pressure on latch to start stripping the forms Lifetime Warranty Available in Economy style

TURNBUCKLE

Adjusts alignment accurately and quickly Rolled threads assure ease of operation event when the forms are full 6 inch Take Up Constructed of heavy steel 10 foot Turnbuckle Wall Brace available - same DURAFORM Turnbuckle assembly with steel piping attached to provide an all inclusive product

SCAFFOLD BRACKET

A DURAFORM exclusive. A true scaffold bracket that fits properly on any DURAFORM or compatible 4-Bar, 5-Bar or 6-Bar system. Allows construction of proper hand rail and toe board with 20 inch walk space for your workers safety. Tube brace back to the form for rigidity. Tested and satisfy OSHA and ANS standards covering scaffolding safety and rated HEAVY DUTY by their definitions. Testing exceeded requirements for maximum loading of 1,190lbs. We recommend spacing brackets on six foot centers. Make Safety a Habit

OFFSET CLIP

Connects forms on stepdown Holds tie in place, nails flush to next form

2 inch OFFSET FILLER

Matches with 8 inch filler to transition a straight wall by 2 inches Transition from 12 to 10 or 10 to 8 or any dimension thats needed

STACKING TIE and WEDGE

Thicker tie for stacking with 4 Bar system Available for 8,10 or 12 walls (100 pcs per box) Reusable wedges (50 pcs per box)