HD WALER BRACKET

Straightens formed wall holding dimensional lumber to back of form panels Available in 6 HD, 8 HD, 10 HD, and 12 HD All HD Walers have additional stiffleg for heavy duty support Attached to panels by locking on the accessory bolt

TOP WALER with WEDGE

The answer to straight and true walls - DURAFORM Top Waler allows concrete to be poured to the top of the forms Top Walers can be used to provide a stepped-in ledge to support top panels for stepped walls Perfect solution for brick ledge problems - stop struggling and make your job easier! Placing top walers at alternating joints accurately aligns the top of the wall by locking with a wedge 2x4 at the top outside of the forms Using top walers and 2x4 allows you to strike off at the top of the form, leaving only a minute indentation in the finished wall Constructed of 7 gauge steel

4 inch WALER with WEDGE

Straightens the wall using 2x4 with a wedge to hold forms tight and secure Wedge can be locked in the up position, allowing for one man operation If used on the 6 Bar system, this bracket eliminates the need to align the top of the forms

DURAFORM 2018

ALWAYS USE PROPER POURING AND SAFETY PRACTICES!

Giving Form to Concrete Ideas!

HD WALER BRACKET

Straightens formed wall holding dimensional lumber to back of form panels Available in 6 HD, 8 HD, 10 HD, and 12 HD All HD Walers have additional stiffleg for heavy duty support Attached to panels by locking on the accessory bolt

TOP WALER with WEDGE

The answer to straight and true walls - DURAFORM Top Waler allows concrete to be poured to the top of the forms Top Walers can be used to provide a stepped-in ledge to support top panels for stepped walls Perfect solution for brick ledge problems - stop struggling and make your job easier! Placing top walers at alternating joints accurately aligns the top of the wall by locking with a wedge 2x4 at the top outside of the forms Using top walers and 2x4 allows you to strike off at the top of the form, leaving only a minute indentation in the finished wall Constructed of 7 gauge steel

4 inch WALER with WEDGE

Straightens the wall using 2x4 with a wedge to hold forms tight and secure Wedge can be locked in the up position, allowing for one man operation If used on the 6 Bar system, this bracket eliminates the need to align the top of the forms

ALWAYS USE PROPER POURING AND SAFETY PRACTICES!

Giving Form to Concrete Ideas!

© DURAFORM 2018